Next day delivery available before 8pm Sunday to Friday.

Patagonia DIY Repair Guide

Patagonia is on a mission to change the way we think about our clothes. The clothing industry alone is responsible for 10% of global emissions. One of the single biggest things we can do to combat this as individuals is to keep our clothing in use for longer. Keeping your existing kit in play for a further 9 months can reduce its carbon, water, and waste footprints by 20-30%.

 

To Patagonia quality is an environmental issue. By addressing its own responsibility to people and planet, whilst empowering its customer community, it seeks to lead as an example for other companies to follow. Whilst their product has been built to highest environmental and performance standards, Patagonia product is also covered by the Iron Clad Guarantee to ensure that whatever life throws at you and your kit, it’s covered for repair.

 

Even the best quality kit needs some TLC every now and then but knowing where to start can be tricky. Check out the simple step by step care guide below to learn how to take care of some popular garments.

How to wash a down jacket
How to wash a waterproof jacket
How to repair a down jacket

How to wash your Patagonia down jacket?

If you’ve just got back from your latest adventure and noticed marks on your jacket, fear not, Patagonia have some top tips on how to clean a down jacket.

 

Washing a down jacket is pretty straightforward and can be done at home in a domestic washing machine.

Step 1

  • Lay your jacket out flat and check you’ve not left anything in the pockets
  • Zip up all of the zippers
  • If your jacket has hook-and-loop tape fasten it closed
  • Pop your jacket in the washing machine

Step 2

  • Add a technical wash designed for down garments to your machine
  • Check the instructions about how much to add for your jacket

Step 3

  • If possible set load size to small
  • Set the temperature to cool/cold
  • Run the machine on a gentle or normal wash cycle

Step 4

  • Leave your jacket in the machine and wash on a second cycle

Step 5

  • Remove your jacket from the washing machine and place it in your tumble dryer
  • Add a couple of tennis balls to the drier to prevent the down clumping
  • Set the dryer to a low heat and start on a normal cycle
  • It’s important to completely dry your jacket, so you may need to put on a second low heat cycle
  • If you don’t have a dryer or prefer a more environmentally-friendly option, you can line dry your jacket, but you must ensure it’s completely dry before wearing again

How to wash a Patagonia waterproof jacket?

Just like your down jacket, it is easy to wash your waterproof jacket at home. All you need is your washing machine and some technical waterproof wash.

Step 1

  • Inspect the stain and brush off any dirt or debris
  • You should pre-treat stubborn stains following your garments care instructions

Step 2

  • Zip up the main zip fully

 

Step 3

  • Loosen any drawstrings and undo any cuffs
  • Unzip your pocket zippers and remove any items from them

Step 4

  • Place your jacket in your washing machine
  • Add laundry soap – use either a specifically formulated soap for waterproof clothing or gentle nondetergent laundry soap
  • Don’t use soap containing bleach, fabric softeners, enzymes, stain removers, perfumes or whitener

Step 5

  • If possible set the load size to small
  • Set the water temperature to warm/cold
  • Run the machine on normal setting

Step 6

  • Once the wash cycle has finished, put it on again to rinse out any remaining soap
  • Remove your jacket from the washer and inspect it
  • If your jacket looks or feels funny, put it back in the washer and run another rinse cycle
  • If your jacket looks clean, you can dry it either on your washing line or in a dryer

How to repair a down jacket?

We know that feeling of dread when you snag your sleeve and hear that dreaded rip, but a tear needn’t signal the end of your down jacket. Making repairs to your down jacket is pretty easy; all you need is some repair tape, a permanent marker and some scissors. Follow this step-by-step guide from Patagonia:

Step 1

  • Inspect the damage and clip any dangling threads, fabric or feathers, using small scissors 
  • Don’t pull the feathers out with your fingers, as this encourages more feathers to come out and makes the hole bigger

Step 2

  • Get your repair tape and flip it onto the back side
  • Using a fine-point permanent marker, draw an oval slightly larger than the hole you are repairing
  • For a wide hole draw a rectangle with rounded edges as this will prevent the corners from getting caught and peeling up

Step 3

Cut out the shape, using scissors

  • Lay the shape over the hole to check it is large enough- the patch should reach the fabric on all sides with at least 1/8" overlap

Step 4

  • Peel the backing off the repair tape, so only the clear sticky layer remains
  • Don’t touch the sticky side, as this will reduce its sticking capabilities

Step 5

  • Lay the sticky side of the tape over the hole, and press down with your finger
  • Use your fingernail to work the air out of the tape, rubbing and pressing down on it with a warm palm until it is well-adhered
Shop Proofing and Protection

Let us know you agree to cookies

We use marketing, analytical and functional cookies as well as similar technologies to give you the best experience. Third parties, including social media platforms, often place tracking cookies on our site to show you personalised adverts outside of our website.

 

We store your cookie preferences for two years and you can edit your preferences via ‘manage cookies’ or through the cookie policy at the bottom of every page. For more information, please see our cookie policy.