The Roxy Meridian Jacket has the protection you need to tear up the mountain and the styling you need to stand out from the crowd. Insulated with 3M Thinsulate® Insulation, the Meridian Jacket provides fantastic warmth without adding weight and bulk, leaving plenty of room for layering when the temperature drops. There is waterproof, breathable protection on hand to make sure that you stay dry and comfortable and all the features that you need to have an awesome day, whether you are in the park, on the piste or in the powder.
| Quiktech 10K | Garments built with Roxy Quiktech 10K are tested to be water resistant for more than 10,000mm and are highly breathable, allowing at
least 10000g/m2/24h of perspiration to escape. Quiktech 10K eliminates humidity and helps you to stay dry by preventing outside wetness from seeping through, while still allowing perspiration to escape from inside the
garment. Quiktech10K technology regulates body temperature and prevents overheating, wetness and freezing.
|
| Bluesign | Companies who gear their production to the bluesign® Standard guarantee their direct customers and the consumer that, throughout the entire manufacturing chain, only those components and processes are used which are safe for humans and the environment. |
| Waterproof Rating | This is measured and expressed as Hydrostatic Head in millimetres (mm). To find out the Hydrostatic Head of a fabric the manufacturer will take a clear tube and clamp their material over the bottom end. They will then fill the tube slowly with water and watch to see how high the column of water can get before the material lets drips through. The higher the hydrostatic head, the better the water protection. The European Standard a fabric must meet to be classified as waterproof is a Hydrostatic Head rating of 1500mm, and on average, outerwear fabrics tend to have a hydrostatic head of 10000mm and above. |
| Breathability Rating | Breathability is measured as a rating in grams of how much vapour a square metre of fabric will allow to pass through in 24 hours (g/m2/24). It should be noted that breathable fabrics do not stop you sweating and care should be taken as to clothing worn beneath waterproof/breathable shells. High quality base layers and fleece or insulated midlayers should in themselves draw vapour from the body and pass it outwards, thus allowing the outer fabric to do its job. Cotton clothing should never be worn as part of a performance clothing layering system. |
| DWR | A finish applied to a fabric that will bead-up water on its surface to stop it soaking into the fibres. This maintains breathability and shortens drying times. |
| Fully Taped Seams | Every single seam is taped with a high quality waterproof band. |
Yellow
We aim to offer competitive prices, however if you find products cheaper elsewhere we will match the price. click here for more info...
